产品品牌美国陶氏
产品产地
产品型号DOWSIL™ 3363 Insulating Glass Sealant
包装规格
陶氏DOW硅酮密封胶DOWSIL™ 3363 Insulating Glass Sealant
高强度二级双组分硅酮密封胶,专为高强度应用而设计,传统密封剂强度较低会导致接头尺寸增大。它可以在高要求的中空玻璃应用中实现经济的接头尺寸,例如:高层建筑中的大风,飓风载荷,冷弯玻璃或炸弹爆炸等高冲击载荷。较小的关节尺寸可以更快地填充,从而提高生产率。 高设计强度
*比c高50%设计强度为0.14 MPa的常规结构有机硅 设计自由
A high strength secondary two-part silicone sealant specifically designed for high strength applications, where conventional sealants with lower strength would lead to increased joint sizes. It enables economical joint sizes in highly demanding insulating glass applications such as: high wind in tall buildings, hurricane loads, cold-bent glass or high impact loads such as bomb blast. Smaller joint dimensions can be filled faster and therefore lead to productivity enhancements.
High Design Strength
Allows joint size reduction up to 30%
Outstanding Adhesion
Adheres to a wide range of substrates
DOWSIL™ 3363 Insulating Glass Sealant has been engineered specifically for use as a secondary seal in demanding double, triple and gas-filled insulating glass applications.
With a 50% higher design strength (0.21 MPa with European approval)*, DOWSIL™ 3363 Insulating Glass Sealant enables more economical, yet stronger, jointing in demanding tall building design and construction, thereby increasing transparency and design freedom.
Stress on the primary sealant is limited thanks to the high strength of DOWSIL™ 3363 Insulating Glass Sealant, thus adding to the façade durability and longevity.
The high strength of DOWSIL™ 3363 Insulating Glass Sealant ensures:
*50% higher than conventional structural silicones with a design strength of 0.14 MPa
Insulating glass units can withstand higher loads.
陶氏DOWDOWSIL™3363中空玻璃密封胶参数
颜色:黑色
设计强度:0.21 MPa
硬度计 - 肖氏A:60肖氏A
杨氏模量:4.8 MPa
优异的可挤出性:√
透气性:0.46
Color:Black
Design Strength:0.21 MPa
Durometer - Shore A:60 Shore A
Young Modulus:4.8 MPa
Excellent extrudability:√
Gas Permeability:0.46