陶氏DOW有机硅胶粘剂DOWSIL™ TSSA Transparent Silicone Structural Adhesive

产品品牌美国陶氏

产品产地
产品型号DOWSIL™ TSSA Transparent Silicone Structural Adhesive

包装规格

对于点固定无框玻璃和需要加热固化的加成固化硅胶。在固化过程中没有释放副产物。产品必须在低于+ 5°C（41°F）的温度下保持冷藏，直至应用和固化。

耐用能源性能
避免因玻璃钻孔消除导致气体泄漏

高设计强度
] 优于欧洲耐久性要求

纯玻璃美学
时尚，清晰的外立面设计

点固定点的水晶透明粘合玻璃幕墙

为了增强设计自由度和美感，DOWSIL™透明硅胶结构胶（TSSA）为晶莹剔透的点固定玻璃幕墙提供了新一代粘接选择。无需玻璃钻孔，无垫圈;充气的中空玻璃腔保持不受影响，因此不会因垫圈变质而漏气。这种创新的结构粘合剂有助于优于现有技术最大限度地提高外墙的热性能。

将晶莹剔透的结构硅胶玻璃胶粘剂用于您

DOWSIL TSSA专为点固定单层或双层玻璃幕墙设计，具有所需的功能迎接你的挑战。

1 mm厚的结构硅树脂透明薄膜

与传统结构玻璃有机硅（如DOWSIL™993结构玻璃密封胶）相比强10倍：1.3 MPa动态设计载荷和0.6 MPa静态设计载荷 - 适用于非静载负载结构。

以我们的Quality Bond™计划为后盾，强调了使用质量控制，质量保证和应用最佳实践标准进行生产的承诺

DOWSIL TSSA拥有经过广泛测试 - 耐久性极佳，优于欧洲技术认证指南002

的要求。额外的安全性和安全性 - 当应力水平超过最大设计值时，有机硅薄膜内的安全指示器会使粘合剂变白RET当压力消失时，骨灰盒变回晶莹剔透（见图）

不通过玻璃的点固定系统

DOWSIL TSSA是最大化热量的下一代粘接外立面的性能使更轻的空间更加明亮。

设计自由

通过硅树脂结构粘合提高美观性和耐久性。

能源效率

使用结构粘合技术提高热效率。

For point fixed frameless glazing and an addition cure silicone requiring heat to cure. There are no by-products released during the curing process. The product must be kept refrigerated at temperatures below +5°C (41°F) until application and cure.

Durable Energy Performance
Avoid gas leakage due to elimination of glass drilling

High Design Strength
Outperforms European durability requirements

Pure Glass Aesthetics
A sleek, clear exterior façade design

Crystal Clear Bonding for Point Fixed Glass Façades

For enhanced design freedom and aesthetics, DOWSIL™ Transparent Silicone Structural Adhesive (TSSA) provides a next-generation bonding option for crystal clear, point fixed glass façades. No glass drilling, no gaskets; the gas-filled insulating glass cavity remains untouched, therefore no gas-leakage due to deteriorated gaskets. Outperforming current technologies, this innovative structural adhesive helps maximize thermal performance of façades.

Put Crystal Clear Structural Silicone Glazing Film Adhesive to Work for You

Specifically designed for point-fixed single- or double-glazed façades, DOWSIL TSSA has the features needed to meet your challenges.

1 mm thick structural silicone crystal clear film
10 times stronger compared to conventional structural glazing silicones (such as DOWSIL™ 993 Structural Glazing Sealant): 1.3 MPa dynamic design load and 0.6 MPa static design load – suitable for non-dead load supported structures.
Backed by our Quality Bond™ program, underscoring a commitment to manufacture using standards of best practice in quality control, quality assurance and application
DOWSIL TSSA has been extensively tested – durability is excellent, outperforming the requirements of the European Technical Approval Guideline 002
Additional security and safety – a safety indicator within the silicone film turns the adhesive white when the stress level exceeds the maximum design value and returns back to crystal clear when stress is removed (see illustration)